Category Archives: Hunting

How to Make Plexiglas Windows for Deer Stands

A deer stand is a highly sophisticated amenity used to hunt down deer and other wildlife animals. With technology came along easier methods of hunting, one of which was the windows plexiglas. Using this the hunter is granted access to actually get a clear view of their subject beast without being seen by it. Amazing I know, but why spend $1000 for such a tool when you can make it yourself? Its easy! I’ll show you how.

Required Materials

  • Plexiglas
  • Sliding Aluminum Window Frames

Required Tools

  • Safety Glasses
  • Paint & Paint Brush (optional)
  • Measuring Tape
  • Drill, Screwdriver and nails

Instructions

  1. Determine the size of the window – It is advised that try to get plexiglas windows if you are planing on building a deer stand. It is also a possibility, however, that a pre – existing deer stand can be fitted using plexiglas windows just the same. For best results place plexiglas windows on all four sides of the deer stand. To do this you will need to first determine the sizes of the windows so as to have the lengths ready when you go to buy the windows. This will also save you time and energy as you will not have to cut the windows yourself.
  2. Lets Begin – Now that we have determined the sizes and acquired our windows the next step will be to saw out the areas for the windows on the deer stand. Keep in mind while sawing that it is always best to have your windows at eye level to see your subject with ease. So be sure to determine initially what position you will be in when using the stand.
  3. Installing your Frames – Upon completion of sawing off your window locations the next step will be to install our frames. You may choose to use either aluminum or wooden frames. But keep in mind while deciding that using aluminum frames will give you an advantage as you will then be able to slide open the windows when required in the heat of hunting. The frames should be fixed onto the stand using a drill and nails. Remember to leave enough space to slide in your windows.
  4. Now attach your windows – As soon as you have fitted all the frames you can attach your windows by simply sliding them into place. Now you will need to do some troubleshooting to ensure that your windows are to open and close accordingly without making any noise. If successful, complete your widow fittings by fixing the open end together.

Tips

  • Consider using aluminum frames over wooden frames as aluminum frames tend tend to withstand various weather conditions hence lasting longer than the wooden frames.

    Determine the sizes of plexiglas you will need before hand so that you will not need to cut the windows yourself. This can be very dangerous and is only recommended if you are a professional.

How to Use a Tube Turkey Call

Whether you’re a hunter or just love to play around, learning how to use a tube turkey call is easy. You just need to get the following things ready.

Required Tools and Materials

  • PVC pipe (3/4 of an inch)
  • Sandpaper
  • Saw (any type)
  • Plastic lid
  • Rubber band
  • Glove (latex)
  • Camouflage tape
  • Scissors
  • Pen or pencil
  • Glue or other adhesive

Step 1

If the PVC pipe is not yet cut to size, slice it to ¾ of an inch. Now take the sandpaper and apply it to both ends of the pipe. Make sure you apply enough so any rough parts are removed.

Step 2

Place the pipe on the plastic lid. To use a tube turkey call, use the pen to outline the lid’s shape on the pipe. Now slice that shape with the scissors. Try to cut along the lines as accurately as possible. Now slice the circle in the middle.

Step 3

Apply some adhesive on the half circle. Put it on the end of the PVC pipe. Apply some more of the sandpaper around the corners. Finally you can add the tape across the PVC.

Step 4

Get the latex glove and make an incision in it. Make it a 2 in sq size. Take the latex and set it on the pipe. Apply the latex on the opposite end of the plastic lid you created. To use a tube turkey call, you should allow for some space between it.

Step 5

Get the rubber band. Place it around the pipe. The rubber band must also cover the part of the latex.

Step 6

In order to make the call, do the following. Place the lid sided pipe on your lower lip. Blow between the space you made at the latex and plastic cover.

Tips and Warnings

Besides the PVC pipe, you can use a film container instead.

Be careful when you create these sounds. If the device is well made, hunters might mistake you for a real creature. If there are several people with you, they could end up hunting for you. When you use a tube turkey call, make sure everyone in the party knows what you are going to do.

Practice is essential to using the device properly. Take some time and study the sounds the animal makes. They make numerous sounds. All of these can be made by the device. You just need to familiarize yourself with it. The creatures utilize different sounds depending on their actions. To get the most from the device, learn their habits. That way, you’ll be able to make the sounds at the right time.

For the right sound effects, move your lips when you blow. Say the word “tick” while adjusting the lower and upper lips. The same technique is used for making other sounds like “gobble”, “kee kee” and cluck”.

Understanding how to use a tube turkey call is essential for hunters. If you are going to use one, just spend some time practicing. In time, you’ll get it right.

Gutting a Deer

Gutting or field dressing a deer means skinning and cleaning it. This process will determine the quality of meat you bring home. Therefore, your next step after shooting a deer would be crucial. This will also make you feel that your hunt was after all a success.

The preparations for gutting begin before each hunt. Be sure to bring along with you the following materials:

  • sharp knife
  • signed hide tag with attaching cord
  • plastic gloves that reach up to the armpits
  • plastic waste bag
  • hose pipe
  • one-gallon jug of water for cleaning up

You should approach your deer with caution. Check first if it is already dead before getting any nearer. Label your deer immediately to avoid confiscation. Doing so will also avoid other possible problems. Here are the easiest steps in gutting a deer:

  • Start gutting your deer by holding up the animal on its back then cutting its genitals.
  • By carving around the anal region with the knife, make a hole. Withdraw the whole intestines from the body cavity.
  • Use the first two fingers of your other hand to guide you while cutting the genitals up to the rib cage. Be extra careful not to touch the entrails while cutting through the hide and the belly.
  • Continue cutting on up to the base of the skull. If you want to save the cape for souvenir of your hunting, don’t cut any further up the belly than the sternum.  For those who like to eat the heart and liver, put them in a separate cloth bag.
  • Cut off the windpipe and esophagus at the base of the skull, and sever the diaphragm. If you want to be sure that all the organs have been cut and removed, roll the animal on the other side then tilt the deer upward so that the blood will drain off.
  • With clean water, wash any debris from the cavity. It can be easily done by hanging the carcass from a tree branch then hosing it with water.

It is vital that the deer is properly handled after shooting it. The quality of its meat will be uncovered after the deer is appropriately dressed and cooled. To ensure that you will be able to get the best quality of deer meat, you can follow the aforementioned simple steps in handling your deer after slaying it.

Deer Blinds Windows

To conceal themselves during hunting season, hunters primarily use deer blinds. Most of these devices are fitted with windows to allow hunters to see outside the blind without revealing their location. There are different kinds of windows used for deer blinds.

 

Types of Windows

 

1. Side sliding window

One advantage of sliding deer blind windows is that they can be kept closed, especially during rainy and cold seasons, until you are ready to take your shot. It can also be tinted or blackened. However, it creates a slight noise when opening the window and it does not allow a 360-degree view.

2. Manufactured aluminum windows

These windows work the same way as windows work in houses.They also hve a reliable insect-proof system as these windows come standard with screens.

3. Slide-up windows

These windows may have full or narrow openings. They may also be cut down in width, depending on one’s preference.

4. Glass windows

These types of windows provide reliable protection from the elements, but they provide poor ventilation. They might also give away a hunter’s position easily as glass reflects sunlight and glare.

Any of these windows can be fitted in a deer blind when bought from a manufacturer. However, deer blind windows can be built alone with proper plans and equipment. Below is a list of materials and procedures in making a sliding deer blind window.

 

Constructing a Sliding Deer Blind Window

 

Materials Needed:

  • sliding window installation kit
  • rags
  • spray paints for camouflage (brown, green, black, yellow ochre)
  • water-proofing sealant (optional)
  • pencils or markers

Tools Needed:

  • masking tape
  • measuring tape
  • working gloves
  • screwdriver
  • cordless drill

Steps:

  1. Put up the deer blind and take measurements of the deer blind window. Avail of the services of a local home improvement store specializing in windows to assemble a window that matches these measurements.
  2. Choose the frame and the type of sliding window to be installed. Frames may be made out of aluminum or wood, while windows may have a screen slide or a glass slide.
  3. Spray paint the frames of the sliding windows with the same camouflage color as the deer blind.
  4. Inside the deer blind, securely align the frame of the sliding window with a masking tape.
  5. Use a marker or pencil to mark the areas where the screws will be placed. Drill holes on these marked areas.
  6. Install the sliding window by following the instructions in the kit provided by the manufacturer. Do not assemble the window before the installation as it is important to align the frame holes to that of the holes made on the deer blind. Affix the frame with the screws that came with the kit.
  7. When waterproofing a glass-sliding window, the surface area of the frame and the sliding window should be cleaned with damp rags. Apply waterproofing sealant when it has dried.
  8. Install the screen or glass-sliding windows.

Deer Blinds

If your hobby is hunting deer, you may want to consider getting one of the deer blinds available in hunting shops and stores for hobbyists. A deer blind is a hunting product that enables you to conceal yourself outdoors while you are waiting for deer.

A deer blind consists of a structure, usually with a dark or camouflaged color, with windows. Deer blinds are normally made of timber, although they can also be made of fiberglass and metal.

Deer blinds also come with hiding chairs, so that you can sit comfortably while waiting for your deer. Other features of deer blinds include compartments where you can hide hunting gear and apparel.

Commercial deer blinds come in two major types: pre-built blinds and disassembled blinds. The former is sturdier while the latter offers convenience in terms of easy storage.

If you wish to build a deer blind using your own materials, you can purchase a deer blind plan. These documents enumerate the needed tools, materials and the step- by-step procedures in creating your own deer blind.

To make full use of your deer blind, you need to keep in mind a few things. First, choose a place where your deer blind will not be noticed by the deer and other animals. You may choose to set up your deer blind within a place where there are trees and plants. Second, you should make sure that your blind is fastened firmly to the ground. Since most deer blinds are built from lightweight materials, extremely strong winds may knock them down.

Bait Tanks

Bait tanks are instruments used to keep baits alive for an extended period of time. People whose hobby or profession is fishing normally use these tanks. If you prefer to grow your own bait rather than buy them from a store, it is a good idea for you to use a bait tank.

One unique characteristic of bait tanks is their insulation. These tanks are made of materials that prevent the temperature inside from being altered by external temperature.

You can bring your bait tank with you in your boat. You can be assured that the heat of the boat’s floor would not affect the temperature of the water in the tank.

Apart from this, bait tanks are also complete with intricate systems to keep your bait alive. The filtration system carries out the process of maintaining clean water. The aeration system provides fresh air to the tank. Instructions on how to set up and maintain the said systems are provided in the manual that comes with the tank’s package.

The inner and outer walls of bait tanks are usually made of solid polyethylene. This makes the tanks sturdy and relatively light to transport. The lids of bait tanks are constructed such that water will not splash out in case the tank is shaken or moved.

Bait tanks also use quiet pumps that are useful especially if you are out in the water waiting for fish. These pumps require low amp and do not quickly drain your battery.

How to Throw a Casting Net

A casting net is a type of fishing net that is thrown out over the water. Once it is thrown, it sinks and eventually catches fish beneath it while it is falling in the water. The net has weights attached to its edges, making sure it sinks properly. It also has a line attached to it so that it can be recovered properly.

 

Steps in Throwing a Casting Net

 

  1. Locate the end part of the net’s hand line and create a wrist loop in it. Place the loop above your right wrist. If you are left-handed, use your left wrist.
  2. Loop the rest of the line around your right hand to collect it.
  3. Check the net to make sure it is hanging straight. Then clutch the net about one-third of the way down.
  4. Grasp the lead line using both of your hands. See to it that it is not tangled or twisted. A twisted lead line will prevent you from making a smooth cast.
  5. Do a complete counterclockwise cast. Gather the entire net in one hand with the weights hanging down. Swing the net like a sling, up and out into the water.
  6. If you are ready to cast in the net, use the line looped around your hand.

Remember to perform these steps regularly as a practice. Your yard is the best area to practice throwing your casting net. The distance you would cover as well as the smoothness of your cast will increase significantly, as you become more familiar with the procedures.

How to Throw a Cast Net

Cast netting is a method of fishing. It involves using a net with weights tied to it. The net is thrown into a river or lake and is retrieved by a line tied to the fisher’s arm. You can catch shrimp, fish, and other animals with this technique.

The net has weights attached all along its perimeter. The weights make sure that the net stays down in the water. It also has a main rope attached to the center of the net. This is used to recover the net from the water. The lead line refers to the line of weights attached to the bottom of the net.

 

Here are the Steps to Throw A Cast Net

 

  1. Make a loop at the end of the main rope. This loop is for the wrist. You can use whichever wrist you are comfortable with. This will be needed for reeling in the net after you throw it.
  2. Loop the rest of the line on your wrist so the net can be recovered easily. Check if the net hangs straight. Make sure none of the weights is tangled. You can then hold the whole net 1/3 of its way down.
  3. Kneel and place your foot forward. If you are holding the net with your right hand, put your left foot forward. Just do the opposite if you are left-handed. Pull one loop across your elbow without pulling in the hand that holds the net.
  4. Lay the lead line over your thigh. Continue in a clockwise or counter-clockwise fashion until about half of the net is supported on your thigh. Put the pinky of the opposite hand through the mesh of the first lead line on your thigh. Hold the mesh of the net between your thumb and the first two fingers.
  5. Stand up and prepare to throw the net.
  6. The wind-up is an essential part of the throw. First, put your foot forwardo on the side of the hand that is not holding the net. Shift your weight back a little bit. Rotate to the side so that the net is hanging from it. As you swing forward, shift your weight as well. The throw will be similar in motion to a sling. The net will then leave your hands and arm naturally.
  7. At first, your aim or the distance of your throw might be wrong. Practice throwing so that you can get better.