Before constructing a wooden boat, you must first decide what kind of boat you want. Consider where you would use the boat and for what purpose. You can create a small schooner, a row boat, a canoe, or any other wooden boat. This will help you decide the kind of boat you will build. Once you know what kind of wooden boat to make, you can buy the patterns and plans needed for the boat. Hobby and specialty stores have a number of plans you can choose from.
Study the pattern and plan your project. Prepare the materials and tools you will need according to the plan you chose.
Start by building the bottom board. Work your way to the jig and the ribs. Follow the instructions in the plan. You can modify the measurements according to your preference. However, if this is your first time to build a wooden boat, you may want to stick to the measurements indicated in the plan.
After the parts have been finished, turn the bottom board around and tie it to your builder’s jig. Then, you have to place spreaders amidst the ribs. This lets you hold them at a particular width.
Next, you need to paste, screw, and drill the parts of your boat. Then, you have to plank the boat and close its interior structure. Afterwards, you need to sand the boat’s exterior. Once the sanding of the boat’s exterior is done, do the same procedure on the interior.
Installing the fiberglass is the next step. Make sure the fitting of the fiberglass is dry before fixing it with epoxy to the boat. Check whether the interior and exterior is completely sealed. Finally, you can set up the deck and the seats of your boat.
In some cases, hobbyists forego with fiberglass and decide to go with an all-wood boat. If you decide to use pure wood, you will need to stretch and curve the lumber for the hull. This may take longer than using fiberglass. After the wood is attached to the hull, apply resin and paint to make it waterproof.