How to Build a Skateboard Ramp

A well made skateboard ramp is needed to hone your talent. Build a skateboard ramp and take your skateboarding skill to the next level.

If you take the time to build a skateboard ramp, you’ll be able to indulge your passion for the sport anytime you like. To get started, prepare the following stuff.

Required Tools and Materials

  • Brace
  • Saw (any type)
  • Wood boards (2 x 4s and 2 x 6s)
  • Hammer
  • Nails
  • Tape measure
  • Plywood
  • Pencil and papers

Make a Design Drawing

Get a good idea of what you want the structure to look like. There is the quarter pipe, halfpipe and many others. You should make a clear design and adhere to it. When you have chosen one, decide on the size. The height, verticality and transitions will determine the materials you’ll be using to build a skateboard ramp.

Create the Transition

Take the plywood and draw the curves. This can be your template for making other pieces. Make the same curves on other pieces and cut them with the saw. Try to be as accurate as possible when slicing the plywood. Make a couple of these pieces.

Set the Ramp Framework

Get the 2 x 6 or 2 x 4. Cut them to make the skeleton or framework. Make the board or boards as wide as needed. Again it’s important that you make the proper measurements so the plywood will be sufficient.

Take the two wood boards you cut earlier. To build a skateboard ramp you need to secure both to the framework. These need to be aligned to the ramp’s shape. Put two or three boards below the ramp for support. You can put in a brace too if you want.

Make the Deck

Use a tape measure to get the height of the transition. Saw the plywood. It needs to match the right sizes. Take the nails or screws and link with the skeletal framework.


Be sure that the foundation is sturdy. It is essential regardless of the ramp type you make. This is especially true if it’s going to be a huge structure. When you build a skateboard ramp, this aspect must be a priority.

Treated wood boards are recommended for these structures. They are very strong and durable. They can withstand most of the weather fluctuations. If they’re too expensive or unavailable, stick a couple of plywood boards together. These will be quite effective in providing support too. It is imperative that you stain these wood boards. It isn’t so with treated lumber, but for non treated types it is.


Skateboarding is complex and requires hours of practice. Start with only the basic moves. Only when you master them should you move to the more complicated jumps. Always wear protective gear for yourself. These include knee pads, elbow pads and other accessories.

Make sure you create the structure on a plain and even surface. You should also pick a spot away from traffic and other people.

There is nothing too difficult about trying to build a skateboard ramp. You can do it by yourself easily. You can even make them with your friends and have more fun in the process.

More articles on How to Build a Skateboard Ramp

  1. How to Build a Skateboard Ramp